PX-65011
The PX-65011 is a compact, light-weight, easy to carry and handle general dewatering submersible pump. It is ideal for chemical cleaning of swimming pools with its pump casing and impeller manufactured from a blended rubber compound that provides maximum wear resistance up to 3 times over cast iron. The PX model design permits vertical or horizontal 2” discharge. This pump comes with a 20’ power cord and can pump 4110 GPH.
Model: PX-65011
Suction Discharge Size: 2″ NPT
Maximum Capacity: 4110 GPH
Maximum Head: 33′
Motor Output: 1/2 HP
Rated Current: 6.5 AMP
Diameter: 7 1/4″
Dry Weight: 33 LB
Cable Length: 20′
PRICE: $365
PS-65011
Features
– Water is channeled through the outer wall to cool the motor for maximum endurance
– It is compact, light weight, easy to carry and handle
– Double mechanical seals run in an oil filled chamber of liquid paraffin to prevent damage from periods of dry running
– Liquid paraffin is used in the shaft seal, therefore water will not be contaminated even in the case of oil leakage
– The cord is of uni-body construction ensuring excellent water tightness
– The built-in thermal protector turns off the power supply in case of overload operation thus protecting the motor.
PRICE: $335
PXL-65011
Features
– Pump down to floor level, within 1mm/0.04”
– Built-in check valve keeps liquid in pump and hose eliminating any “back-flow” situations
-Liquid is channeled through the outer wall to cool motor for maximum endurance
– Double mechanical seal, silicon-carbide, in an oil bath for superior motor protection
– Built-in thermal protector turns off the power supply in case of overload operation
– Impeller and casing are manufactured from a blended rubber compound, providing maximum wear resistance
– Unique design permits either horizontal or vertical discharge, eliminating hose problems
PRICE: $350
PB-65011
Features
– Impeller and casing are manufactured from a blended rubber compound providing maximum wear resistance, up to three times over cast iron
– Water is channeled through the outer wall to cool the motor for maximum endurance
– It is compact, light weight, easy to carry and handle
– Double mechanical seals run in an oil filled chamber of liquid paraffin to prevent damage from periods of dry running
– Liquid paraffin is used in the shaft seal, therefore water will not be contaminated even in the case of oil leakage
– The cord is of uni body construction ensuring excellent water tightness
– The built-in thermal protector turns off the power supply in case of overload operation thus protecting the motor
PRICE: $395
PB7-65011
Features
– Impeller and casing are manufactured from a blended rubber compound providing maximum wear resistance, up to three times over cast iron
– Water is channeled through the outer wall to cool the motor for maximum endurance
– It is compact, light weight, easy to carry and handle
– Double mechanical seals run in an oil filled chamber of liquid paraffin to prevent damage from periods of dry running
– Liquid paraffin is used in the shaft seal, therefore water will not be contaminated even in the case of oil leakage
– The cord is of uni body construction ensuring excellent water tightness
– The built-in thermal protector turns off the power supply in case of overload operation thus protecting the motor
PRICE:$585
NSM-62011
Features
– It is compact, lightweight, easy to carry and handle
– ABS plastic housing is shock resistant and will not rust
– Metal motor housing for cool running
– Oil filled mechanical seal allows for periods of dry running without damage
– 10 foot power cable
– Completely rebuildable-all parts are replaceable
– ¾” garden hose
– 800 gph or 16 ½ foot head
PRICE:$102
SM-62511
Features
– It is compact, lightweight, easy to carry and handle
– ABS plastic housing is shock resistant and will not rust
– Metal motor housing for cool running
– Oil filled mechanical seal allows for periods of dry running without damage
– 8-foot power cable
– Completely rebuildable- All parts are replaceable
– 1260 gph or 20 foot head
PRICE: $150
PB-68011
Features
– Full water channel design to cool the motor for maximum endurance
– Double silicon carbide mechanical seal in oil bath for extended running
– 110V or 220V dual AC voltage design
– Uni- body constructed 40’ power cord for water tightness
– 2HP motor with thermal protector for overload protection
PRICE: $1495
